Raspberry Pi Raspberry Pi Sensors

Raspberry Pi Sensors

Relay Module KY-19 (Songle SRD-05VDC-SL-C)

Tech details: Control signal: 5V-12V Current requirements: ~85 mA Max current: 10A/250V AC or 10A/28V DC Response time: 10msec Operating Temp: -25/+70 C Connectivity: 3 pin...

Lasers! KY-008 laser module for Raspberry Pi & Arduino

Tech details: Wavelength: 650nm (red) Operating voltage: 5V Range: Unlimited* (in vacuum) Current draw: 30mA Connectivity: 3 pin connector, pins as follows: VCC(+): 5V Supply N/A ...

Hall sensor module KY-003 & KY-024 for Raspberry Pi and Arduino

Tech details: Operation voltage 3.3 V, 5 V  Temperature range of -40 °C to 85 °C Current input/output max  8/20mA Response time: 3uS  ...

Light sensor modules KY-018 and LM393 (3 and 4 pin) for...

Tech details: Comparator output, signal clean, waveform, driving ability, more than 15 mA. ( light sensor LM393  KY-018) Potentiometer to adjust the sensitivity of a...

Humidity and Temperature sensor DHT-11 (&DHT-22) for Raspberry Pi and Arduino

Tech details: Supply voltage: 3.3-5V Supply current (running): 0.5mA typ. (2.5mA max.) Supply current (stand-by): 100uA typ. (150uA max.) Temperature range: 0 / +50°C...

LED modules for Raspberry PI, Arduino

One of the downsides of ordering your kits from China is poor labeling. The set came with a picture sheet of low quality, half...

Infrared Sensor HC-SR501 PIR Motion Sensor for a Raspberry PI...

How to use PIR sensor with your Raspberry PI.

Sonar HC-SR04 ultrasonic ranger for a Raspberry PI & Arduino

How to connect sonar to raspberry pi.

More Raspberry Pi articles

video

MagPi – auto-downloader

MagPi - auto-downloader is designed to notify your when the new magazine is available as a PDF. Why should you care about it? This...

Raspberry Pi 3B+Announcement!

It's been some time since the release of Raspberry Pi 3. A few moments ago The Mag Pi announced the Raspberry Pi 3 B+...

New Amazon Dash Buttons

There was a rumour going around that the new buttons are not working. I already own 2 buttons, and I would be OK, but...

Raspberry Pi Zero W WIFI performance

In case you have missed it  - there is a new Raspberry Pi Zero W in town. Since we have a WIFI on board...
video

How to use Join App in NodeRED

It has been a few days since Joao got the Join working with the NodeRED. If you never heard of NodeRED, this is a...